Manufacturers (6004) | (Categories in ‘Manufacturers’: Elta, Flakt Woods, Helios, Soler and Palau, Systemair, Vent-Axia, Ziehl-Abegg, Ruck)
The Helios ELS EC 60/35 P fan insert is equipped with an inner façade and advanced presence detection for automatic operation. It provides three performance levels (60, 45, and 35 m³/h) suitable for both demand-controlled and basic ventilation, with the sensor operating at the 45 m³/h level. The fan also includes adjustable switch-on delay, codable overru ...
The Helios ELS EC 60÷40÷15 fan unit includes a flat facia and delivers airflow volumes of 100, 40, and 15 m³/h. It features a spiral housing combined with an aerodynamically optimized radial impeller designed to provide high pressure output while operating at very low noise levels thanks to advanced ultraSilence technology. Installation is tool-fre ...
The Helios ELS EC 60÷40÷15 F fan insert is equipped with an inner façade and electronic humidity control, delivering airflow rates of 60, 40, and 15 m³/h. It offers adjustable power levels with switch-on delay options of 0 or 45 seconds, along with run-on times of 6, 10, 15, or 21 minutes. Its spiral casing includes an aerodynamically optimized rad ...
The Helios ELS EC 60÷40÷15 NC is a fan insert equipped with an inner façade and a volume flow of 60, 40, and 15 m³/h. It offers multiple power settings with adjustable switch-on delays of 0 or 45 seconds, run-on times of 6, 10, 15, or 21 minutes, and interval operation options of 0, 8, 12, or 24 hours. The fan’s spiral housing incorporates an aerod ...
The Helios ELS EC 60÷45÷25 F is a fan insert featuring an inner façade and electronic humidity control with a volume flow capacity of 60, 45, and 25 m³/h. It offers power levels with adjustable switch-on delays of 0 or 45 seconds and selectable run-on times of 6, 10, 15, or 21 minutes. This unit has a spiral casing with an aerodynamically optimized ...
The Helios ELS EC 60÷45÷25 NC is a fan insert designed with an inner façade and delivers a volume flow of 60, 45, and 25 m³/h. It features multiple power levels with an adjustable switch-on delay of 0 or 45 seconds, selectable run-on times of 6, 10, 15, or 21 minutes, and interval operation options of 0, 8, 12, or 24 hours. Its spiral housing incor ...
The Helios ELS-APASA is a surface-mounted adapter specifically designed for ELS fan units. It features a lateral (side) air outlet configuration, allowing flexible installation where space or duct layout requires side discharge. This adapter ensures a secure and seamless connection to the fan unit, making it a practical accessory for various ELS system ap ...
The Helios ELS-ARS is an adaptation kit that enables rear discharge for ELS fan units. Designed for compatibility with flush-mounted casings that do not include a fire protection sleeve, this accessory allows for flexible installation configurations. The ELS-ARS mounts easily onto the fan’s discharge side, offering a straightforward solution for rear outl ...
The Helios ELS‑D 100 is a two-step fire protection shut-off device designed for horizontal installation in ventilation systems. It serves to prevent the spread of fire through ductwork between building floors. The unit features a compact housing that includes an integrated ceiling duct made of galvanized sheet steel. Both ends of the device are equ ...
The Helios ELS‑D 125 is a two-step fire shut-off device engineered for horizontal installation in ventilation systems. It helps prevent the spread of fire through ductwork to upper or lower building levels. The unit features a space-saving, compact design with an integrated ceiling duct made of galvanized sheet steel. Both ends are fitted with duct ...
The Helios ELS‑D 140 is a two-step fire protection shut-off device designed for horizontal installation in ventilation systems. Its primary function is to block the spread of fire through ductwork between floors. The compact, space-saving housing integrates a ceiling duct constructed from galvanized sheet steel for durability. Each end of the devic ...
The Helios ELS‑D 160 is a two-step fire shut-off device engineered for horizontal installation in ventilation ducts. It is designed to prevent the vertical spread of fire through duct systems across multiple floors. The unit features a compact, space-efficient housing with an integrated ceiling duct made from durable galvanized sheet steel. Both en ...
The Helios ELS‑D 180 is a two-step fire shut-off device specifically developed for horizontal installation in ventilation systems. Its primary function is to stop fire from spreading through ducts between different floors of a building. The device features a compact and space-efficient design, incorporating a ceiling duct made of galvanized sheet steel fo ...
The Helios ELS‑D 200 is a two-step fire shut-off device designed for horizontal installation in ventilation systems. It prevents the upward or downward spread of fire through ventilation ducts in multi-storey buildings. The unit features a compact, space-saving design with an integrated ceiling duct made of galvanized sheet steel for robust performance. ...
The Helios ELS-GAP is a surface-mounted casing designed for easy installation of ELS fan units in any wall or ceiling position. This flat design housing allows flexible mounting, including in room corners, with a compact size of 250 x 250 x 130 mm (W/H/D). Equipped with a discharge spigot (DN 80 mm) featuring a maintenance-free, airtight back draug ...
Note: Code can only be used once per customer. Discount codes are entered after selecting shipping method.
Same day deliveries locally & nationwide (UK mainland only). Price on request — Send message with order, or call 0161 864 1777.
