Products

Home (127) | (Categories in ‘Home’: Bathroom, Kitchen, Wholehouse, WC, Utility Room)

1 Phase on /off Starter c/w Overload
£103.33

1 Phase on /​off Starter c/​w Overload

Brook Crompton are one of the leading motor manufacturers in the UK, this Series 3000 single phase starter offers push button on and off, with overload protection. Overload protection gives extra safety by automatically stopping the fan when the full load current is exceeded, unlike fuse protection which is designed to protect life and u ...

150mm Wall Vent Kit (White) by Vent Axia
£35.23

150mm Wall Vent Kit (White) by Vent Axia

This wall vent kit suit any 150mm wall extractor fan. A perfect way to complete your installation The wall vent kit comes complete with an external wall grille and a telescopic liner. The telescopic liner makes it easy to fit, with no messy cutting required. Telescopic liner suits wall thicknesses from 225mm  ...

3 Phase on off Starter c/w Overload
£103.33

3 Phase on off Starter c/​w Overload

Brook Crompton are one of the leading motor manufacturers in the UK, this Series 3000 single phase starter offers push button on and off, with overload protection. Overload protection gives extra safety by automatically stopping the fan when the full load current is exceeded, unlike fuse protection which is designed to protect life and u ...

315mm dia Flange
£19.00

315mm dia Flange – suits any manufacturer of fans

315mm dia Flange used to bolt directly to any manufacturer of Fans, as part of a full ancillary package or for the fan to mount inline in ducting. This flange is unique because it is designed to fix to UK and European PCD detail, meaning this flange will fix to any manufacturers fans Can also be used to fix directly to a Silencer Can ...

315mm Flexible Connection
£32.13

315mm Flexible Connection

315mm Flexible connection, used to fit to Flanges (with spigots), Silencers (with spigots) or spiral ducting. A flexible connection is used to isolate the fan from the system to prevent vibration transfer and helps minimise noise transfer through fixings or structures. It can also be used to simplify installation by bridging any small gaps b ...

315mm Louvre Shutter
£90.23

315mm Louvre Shutter

A Louvre Shutter is a gravity type shutter which can be used to terminate and weather extract systems. When the fan is running the plastic blades will open allowing the air to be extracted from the system, and when the fan is not running will be closed, this helps to prevent back draughts and water ingress The shutter is commonly used to terminate  ...

355mm dia Flange
£32.00

355mm dia Flange

355mm dia Flange used to bolt directly to the Fan, as part of a full ancillary package or for the fan to mount inline in ducting Can also be used to fix directly to a Silencer Can also be used to fix directly to ducting Hot dipped Galvanised after manufacture

355mm Louvre Shutter
£97.28

355mm Louvre Shutter

A Louvre Shutter is a gravity type shutter which can be used to terminate and weather extract systems. When the fan is running the plastic blades will open allowing the air to be extracted from the system, and when the fan is not running will be closed, this helps to prevent back draughts and water ingress The shutter is commonly used to terminate  ...

355mm Mounting Feet
£16.67

355mm Mounting Feet

Supplied in pairs 355mm Mounting Foot, used to fit directly to the fan as part of a full ancillary package The Mounting Foot can be used to mount the fan in the horizontal or vertical position Usually used in conjunction with Anti Vibration Mounts Can also be used to fit directly to Silencers with or without Anti Vibration Moun ...

400mm dia Flange
£32.00

400mm dia Flange

400mm dia Flange used to bolt directly to the Fan, as part of a full ancillary package or for the fan to mount inline in ducting Can also be used to fix directly to a Silencer Can also be used to fix directly to ducting Hot dipped Galvanised after manufacture

400mm Flexible Connection
£36.75

400mm Flexible Connection

400mm Flexible connection, used to fit to Flanges (with spigots), Silencers (with spigots) or spiral ducting. A flexible connection is used to isolate the fan from the system to prevent vibration transfer and helps minimise noise transfer through fixings or structures. It can also be used to simplify installation by bridging any small gaps b ...

400mm Louvre Shutter
£111.93

400mm Louvre Shutter

A Louvre Shutter is a gravity type shutter which can be used to terminate and weather extract systems. When the fan is running the plastic blades will open allowing the air to be extracted from the system, and when the fan is not running will be closed, this helps to prevent back draughts and water ingress The shutter is commonly used to terminate  ...

400mm Mounting Feet
£17.78

400mm Mounting Feet

Supplied in pairs 400mm Mounting Foot, used to fit directly to the fan as part of a full ancillary package The Mounting Foot can be used to mount the fan in the horizontal or vertical position Usually used in conjunction with Anti Vibration Mounts Can also be used to fit directly to Silencers with or without Anti Vibration Moun ...

450mm dia Flange
£32.00

450mm dia Flange

450mm dia Flange used to bolt directly to the Fan, as part of a full ancillary package or for the fan to mount inline in ducting Can also be used to fix directly to a Silencer Can also be used to fix directly to ducting Hot dipped Galvanised after manufacture

450mm Flexible Connection
£37.90

450mm Flexible Connection

450mm Flexible connection, used to fit to Flanges (with spigots), Silencers (with spigots) or spiral ducting. A flexible connection is used to isolate the fan from the system to prevent vibration transfer and helps minimise noise transfer through fixings or structures. It can also be used to simplify installation by bridging any small gaps b ...

450mm Louvre Shutter
£116.03

450mm Louvre Shutter

A Louvre Shutter is a gravity type shutter which can be used to terminate and weather extract systems. When the fan is running the plastic blades will open allowing the air to be extracted from the system, and when the fan is not running will be closed, this helps to prevent back draughts and water ingress The shutter is commonly used to terminate  ...

450mm Mounting Feet
£18.89

450mm Mounting Feet

Supplied in pairs 450mm Mounting Foot, used to fit directly to the fan as part of a full ancillary package The Mounting Foot can be used to mount the fan in the horizontal or vertical position Usually used in conjunction with Anti Vibration Mounts Can also be used to fit directly to Silencers with or without Anti Vibration Moun ...

500mm dia Flange
£33.00

500mm dia Flange

500mm dia Flange used to bolt directly to the Fan, as part of a full ancillary package or for the fan to mount inline in ducting Can also be used to fix directly to a Silencer Can also be used to fix directly to ducting Hot dipped Galvanised after manufacture

500mm Louvre Shutter
£123.05

500mm Louvre Shutter

A Louvre Shutter is a gravity type shutter which can be used to terminate and weather extract systems. When the fan is running the plastic blades will open allowing the air to be extracted from the system, and when the fan is not running will be closed, this helps to prevent back draughts and water ingress The shutter is commonly used to terminate  ...

500mm Mounting Feet
£28.00

500mm Mounting Feet

Supplied in pairs 500mm Mounting Foot, used to fit directly to the fan as part of a full ancillary package The Mounting Foot can be used to mount the fan in the horizontal or vertical position Usually used in conjunction with Anti Vibration Mounts Can also be used to fit directly to Silencers with or without Anti Vibration Moun ...

560mm dia Flange
£35.00

560mm dia Flange

560mm dia Flange used to bolt directly to the Fan, as part of a full ancillary package or for the fan to mount inline in ducting Can also be used to fix directly to a Silencer Can also be used to fix directly to ducting Hot dipped Galvanised after manufacture

560mm Louvre Shutter
£201.38

560mm Louvre Shutter

A Louvre Shutter is a gravity type shutter which can be used to terminate and weather extract systems. When the fan is running the plastic blades will open allowing the air to be extracted from the system, and when the fan is not running will be closed, this helps to prevent back draughts and water ingress The shutter is commonly used to terminate  ...

560mm Mounting Feet
£33.34

560mm Mounting Feet

Supplied in pairs 560mm Mounting Foot, used to fit directly to the fan as part of a full ancillary package The Mounting Foot can be used to mount the fan in the horizontal or vertical position Usually used in conjunction with Anti Vibration Mounts Can also be used to fit directly to Silencers with or without Anti Vibration Moun ...

630mm dia Flange
£39.00

630mm dia Flange

630mm dia Flange used to bolt directly to the Fan, as part of a full ancillary package or for the fan to mount inline in ducting Can also be used to fix directly to a Silencer Can also be used to fix directly to ducting Hot dipped Galvanised after manufacture

630mm Flexible Connection
£50.54

630mm Flexible Connection

630mm Flexible connection, used to fit to Flanges (with spigots), Silencers (with spigots) or spiral ducting. A flexible connection is used to isolate the fan from the system to prevent vibration transfer and helps minimise noise transfer through fixings or structures. It can also be used to simplify installation by bridging any small gaps b ...

630mm Louvre Shutter
£245.76

630mm Louvre Shutter

A Louvre Shutter is a gravity type shutter which can be used to terminate and weather extract systems. When the fan is running the plastic blades will open allowing the air to be extracted from the system, and when the fan is not running will be closed, this helps to prevent back draughts and water ingress The shutter is commonly used to terminate  ...

630mm Mounting Feet
£42.00

630mm Mounting Feet

Supplied in pairs 630mm Mounting Foot, used to fit directly to the fan as part of a full ancillary package The Mounting Foot can be used to mount the fan in the horizontal or vertical position Usually used in conjunction with Anti Vibration Mounts Can also be used to fit directly to Silencers with or without Anti Vibration Moun ...

710mm dia Flange
£39.00

710mm dia Flange

710mm dia Flange used to bolt directly to the Fan, as part of a full ancillary package or for the fan to mount inline in ducting Can also be used to fix directly to a Silencer Can also be used to fix directly to ducting Hot dipped Galvanised after manufacture

710mm Flexible Connection
£56.89

710mm Flexible Connection

710mm Flexible connection, used to fit to Flanges (with spigots), Silencers (with spigots) or spiral ducting. A flexible connection is used to isolate the fan from the system to prevent vibration transfer and helps minimise noise transfer through fixings or structures. It can also be used to simplify installation by bridging any small gaps b ...

710mm Louvre Shutter
£221.30

710mm Louvre Shutter

A Louvre Shutter is a gravity type shutter which can be used to terminate and weather extract systems. When the fan is running the plastic blades will open allowing the air to be extracted from the system, and when the fan is not running will be closed, this helps to prevent back draughts and water ingress The shutter is commonly used to terminate  ...

710mm Mounting Feet
£56.19

710mm Mounting Feet

Supplied in pairs 710mm Mounting Foot, used to fit directly to the fan as part of a full ancillary package The Mounting Foot can be used to mount the fan in the horizontal or vertical position Usually used in conjunction with Anti Vibration Mounts Can also be used to fit directly to Silencers with or without Anti Vibration Moun ...

BAS100SLB Bathroom Kitchen wall mounted extractor fan by Vent Axia
£23.81

BAS100SLB Bathroom Kitchen wall mounted extractor fan by Vent Axia

Bathroom, Toilet, Kitchen and Cloakroom Extractor fan c/​w integral backdraught shutter Vent Axia’s BASICS range. Low cost, but top quality, from what we consider to be the most famous brand name in residential and commercial ventilation equipment in the UK. No matter which range of fans you buy, when they have th ...

BAS100SLT Bathroom Kitchen Toilet wall mounted extractor fan by Vent Axia
£32.89

BAS100SLT Bathroom Kitchen Toilet wall mounted extractor fan by Vent Axia – c/​w integral shutter and electronic over run timer ( adjustable up to 30 mins)

Bathroom, Toilet, Kitchen and Cloakroom extract fan Vent Axia’s BASICS range. Low cost, but top quality, from what we consider to be the most famous brand name in residential and commercial ventilation equipment in the UK. No matter which range of fans you buy, when they have the Vent Axia badge, you know you have made the right choice. We r ...

BAS150SLB Bathroom Kitchen Toilet wall mounted extractor fan by Vent Axia
£46.53

BAS150SLB Bathroom Kitchen Toilet wall mounted extractor fan by Vent Axia

Bathroom, Toilet, Kitchen and Cloakroom extract fan c/​w integral backdraught shutter Vent Axia’s BASICS range. Low cost, but top quality, from what we consider to be the most famous brand name in residential and commercial ventilation equipment in the UK. No matter which range of fans you buy, when they have the  ...

BAS150SLT Bathroom Kitchen Toilet wall mounted extractor fan by Vent Axia
£44.83

BAS150SLT Bathroom Kitchen Toilet wall mounted extractor fan by Vent Axia

Bathroom, Toilet, Kitchen and Cloakroom extract fan c/​w integral shutter and electronic run on timer (adjustable up to 30 mins) Vent Axia’s BASICS range. Low cost, but top quality, from what we consider to be the most famous brand name in residential and commercial ventilation equipment in the UK. No matter which ...

CDA 315 x 1D straight through Silencer
£99.00

CDA 3151D straight through Silencer

315mm dia x 315mm long straight through silencer (generally reduces a fan noise level by 7 – 10dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting. The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve ever heard a car with  ...

CDA 315 x 2D straight through Silencer
£135.66

CDA 3152D straight through Silencer

315mm dia x 630mm long straight through silencer (generally reduces a fan noise level by 10 – 13dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting.The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve ever heard a car with  ...

CDA 355 x 1D straight through Silencer
£99.00

CDA 3551D straight through Silencer

355mm dia x 355mm long straight through silencer (generally reduces a fan noise level by 7 – 10dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting.The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve ever heard a car with n ...

CDA 355 x 2D straight through Silencer
£135.66

CDA 3552D straight through Silencer

355mm dia x 710mm long straight through silencer (generally reduces a fan noise level by 10 – 13dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting.The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve ever heard a car with  ...

CDA 400 x 1D straight through Silencer
£104.82

CDA 4001D straight through Silencer

400mm dia x 400mm long straight through silencer (generally reduces a fan noise level by 7 – 10dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting.The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve ever heard a car with n ...

CDA 400 x 2D straight through Silencer
£143.65

CDA 4002D straight through Silencer

400mm dia x 800mm long straight through silencer (generally reduces a fan noise level by 10 – 13dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting. The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve ever heard a car with ...

CDA 450 x 1D straight through Silencer
£125.88

CDA 4501D straight through Silencer

450mm dia x 450mm long straight through silencer (generally reduces a fan noise level by 7 – 10dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting.The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve ever heard a car with n ...

CDA 450 x 2D straight through Silencer
£159.60

CDA 4502D straight through Silencer

450mm dia x 900mm long straight through silencer (generally reduces a fan noise level by 10 – 13dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting.The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve ever heard a car with  ...

CDA 500 x 1D straight through Silencer
£137.32

CDA 5001D straight through Silencer

500mm dia x 500mm long straight through silencer (generally reduces a fan noise level by 7 – 10dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting.The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve ever heard a car with n ...

CDA 500 x 2D straight through Silencer
£185.06

CDA 5002D straight through Silencer

500mm dia x 1000mm long straight through silencer (generally reduces a fan noise level by 10 – 13dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting. The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve ever heard a car wit ...

CDA 560 x 1D straight through Silencer
£158.88

CDA 5601D straight through Silencer

560mm dia x 560mm long straight through silencer (generally reduces a fan noise level by 7 – 10dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting.The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve ever heard a car with n ...

CDA 560 x 2D straight through Silencer
£240.70

CDA 5602D straight through Silencer

560mm dia x 1120mm long straight through silencer (generally reduces a fan noise level by 10 – 13dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting. The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve ever heard a car wit ...

CDA 630 x 1D straight through Silencer
£199.30

CDA 6301D straight through Silencer

630mm dia x 630mm long straight through silencer (generally reduces a fan noise level by 7 – 10dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting.The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve ever heard a car with n ...

CDA 630 x 2D straight through Silencer
£271.34

CDA 6302D straight through Silencer

630mm dia x 1260mm long straight through silencer (generally reduces a fan noise level by 10 – 13dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting.The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve ever heard a car with ...

CDA 710 x 1D straight through Silencer
£262.78

CDA 7101D straight through Silencer

710mm dia x 710mm long straight through silencer (generally reduces a fan noise level by 7 – 10dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting.The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve ever heard a car with n ...

Eclipse 100XP Bathroom Kitchen Toilet wall or ceiling mounted extractor fan by Vent Axia
£32.23

Eclipse 100XP Bathroom Kitchen Toilet wall or ceiling mounted extractor fan by Vent Axia – c/​w integral backdraught shutter and pullcord

Bathroom, Toilet, Kitchen and Cloakroom extract fan Vent Axia’s circular ECLIPSE fans part of the BASICS range. Low cost, but top quality, from what we consider to be the most famous brand name in residential and commercial ventilation equipment in the UK. No matter which range of fans you buy, when they have the ...

ECLIPSE 100XT Bathroom Kitchen Toilet wall or ceiling mounted extractor fan by Vent Axia
£36.17

ECLIPSE 100XT Bathroom Kitchen Toilet wall or ceiling mounted extractor fan by Vent Axia – c/​w integral backdraught shutter and adjustable run on timer up to 30 mins

Bathroom, Toilet, Kitchen and Cloakroom extract fan Vent Axia’s circular ECLIPSE fans part of the BASICS range. Low cost, but top quality, from what we consider to be the most famous brand name in residential and commercial ventilation equipment in the UK. No matter which range of fans you buy, when they have the ...

ECLIPSE 150XP Bathroom Kitchen Toilet wall or ceiling mounted extractor fan by Vent Axia
£39.39

ECLIPSE 150XP Bathroom Kitchen Toilet wall or ceiling mounted extractor fan by Vent Axia – c/​w integral backdraught shutter and pullcord

Bathroom, Toilet, Kitchen and Cloakroom extract fan Vent Axia’s circular ECLIPSE fans part of the BASICS range. Low cost, but top quality, from what we consider to be the most famous brand name in residential and commercial ventilation equipment in the UK. No matter which range of fans you buy, when they have the Vent Axia badge,  ...

Flakt Woods 100mm diameter x 600mm Long Circular Silencer BDER-30-010-060
£24.45

Flakt Woods 100mm diameter x 600mm Long Circular Silencer BDER-30 – 010-060

The effective and economic solution for sound attenuation in circular duct systems. 100mm diameter x 600mm long duct mounted extractor fan silencer. Can be used with manufacturer of fan with spigots to mount inline with ducting. The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve e ...

Flakt Woods 100mm diameter x 900mm Long Circular Silencer BDER-30-010-090
£33.33

Flakt Woods 100mm diameter x 900mm Long Circular Silencer BDER-30 – 010-090

The effective and economic solution for sound attenuation in circular duct systems. 100mm diameter x 900mm long duct mounted extractor fan silencer. Can be used with manufacturer of fan with spigots to mount inline with ducting. The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve e ...

Flakt Woods 125mm diameter x 600mm Long Circular Silencer BDER-30-012-060
£28.89

Flakt Woods 125mm diameter x 600mm Long Circular Silencer BDER-30 – 012-060

The effective and economic solution for sound attenuation in circular duct systems. 125mm diameter x 600mm long duct mounted extractor fan silencer. Can be used with manufacturer of fan with spigots to mount inline with ducting. The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve e ...

Flakt Woods 125mm diameter x 900mm Long Circular Silencer BDER-30-012-090
£37.78

Flakt Woods 125mm diameter x 900mm Long Circular Silencer BDER-30 – 012-090

The effective and economic solution for sound attenuation in circular duct systems. 125mm diameter x 900mm long duct mounted extractor fan silencer. Can be used with manufacturer of fan with spigots to mount inline with ducting. The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve e ...

Flakt Woods 150mm diameter x 600mm Long Circular Silencer BDER-30-015-060
£45.56

Flakt Woods 150mm diameter x 600mm Long Circular Silencer BDER-30 – 015-060

The effective and economic solution for sound attenuation in circular duct systems. 150mm diameter x 600mm long duct mounted extractor fan silencer. Can be used with manufacturer of fan with spigots to mount inline with ducting. The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve e ...

Flakt Woods 200mm diameter x 900mm Long Circular Silencer BDER-30-020-090
£54.45

Flakt Woods 200mm diameter x 900mm Long Circular Silencer BDER-30 – 020-090

The effective and economic solution for sound attenuation in circular duct systems. 200mm diameter x 900mm long duct mounted extractor fan silencer. Can be used with manufacturer of fan with spigots to mount inline with ducting. The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve e ...

Flakt Woods 250mm diameter x 600mm Long Circular Silencer BDER-30-025-060
£55.56

Flakt Woods 250mm diameter x 600mm Long Circular Silencer BDER-30 – 025-060

The effective and economic solution for sound attenuation in circular duct systems. 250mm diameter x 600mm long duct mounted extractor fan silencer. Can be used with manufacturer of fan with spigots to mount inline with ducting. The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve e ...

Flakt Woods 250mm diameter x 900mm Long Circular Silencer BDER-30-025-090
£68.89

Flakt Woods 250mm diameter x 900mm Long Circular Silencer BDER-30 – 025-090

The effective and economic solution for sound attenuation in circular duct systems. 250mm diameter x 900mm long duct mounted extractor fan silencer. Can be used with manufacturer of fan with spigots to mount inline with ducting. The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve e ...

Flakt Woods 315mm diameter x 600mm Long Circular Silencer BDER-30-031-060
£63.34

Flakt Woods 315mm diameter x 600mm Long Circular Silencer BDER-30 – 031-060

The effective and economic solution for sound attenuation in circular duct systems. 315mm diameter x 600mm long duct mounted extractor fan silencer. Can be used with manufacturer of fan with spigots to mount inline with ducting. The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve e ...

Flakt Woods 315mm diameter x 900mm Long Circular Silencer BDER-30-031-090
£87.78

Flakt Woods 315mm diameter x 900mm Long Circular Silencer BDER-30 – 031-090

The effective and economic solution for sound attenuation in circular duct systems. 315mm diameter x 900mm long duct mounted extractor fan silencer. Can be used with manufacturer of fan with spigots to mount inline with ducting. The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve e ...

ME1.1 Fan Speed Controller by Woods
£45.56

ME1.1 Fan Speed Controller by Woods

The Flakt Woods genuine range of ME Electronic fan speed controllers. This range of fan speed controllers is our best selling and can be used with any Fan / Motor which is single phase – 240 volts and fan speed controllable using either 2 or 3 wire control (+earth). ME1.1 suitable for a maximum full load of 1 amp ...

ME1.1 Speed Controller by Flakt Woods
£45.56

ME1.1 Speed Controller by Flakt Woods

The Flakt Woods genuine range of ME Electronic fan speed controllers. This range of fan speed controllers is our best selling and can be used with any Fan / Motor which is single phase – 240 volts and speed controllable using either 2 or 3 wire control (+earth). ME1.1 suitable for a maximum full load of 1 amp ...

ME1.10 Speed Controller by Woods Air Movement
£110.00

ME1.10 Speed Controller by Woods Air Movement

The Woods genuine range of ME Electronic fan speed controllers. This range of fan speed controllers is our best selling and can be used with any Fan / Motor which is single phase – 240 volts and speed controllable using either 2 or 3 wire control (+earth). ME1.1 suitable for a maximum full load of 1 amp  ...

ME1.12 Speed Controller by Flakt Woods
£158.89

ME1.12 Speed Controller by Flakt Woods

The Flakt Woods genuine range of ME Electronic fan speed controllers. This range of fan speed controllers is our best selling and can be used with any Fan / Motor which is single phase – 240 volts and speed controllable using either 2 or 3 wire control (+earth). ME1.1 suitable for a maximum full load of 1 amp ...

ME1.12 Speed Controller by Woods
£158.89

ME1.12 Speed Controller by Woods

The Flakt Woods genuine range of ME Electronic fan speed controllers. This range of fan speed controllers is our best selling and can be used with any Fan / Motor which is single phase – 240 volts and speed controllable using either 2 or 3 wire control (+earth). ME1.1 suitable for a maximum full load of 1 amp ...

ME1.16 Speed Controller by Woods
£216.67

ME1.16 Speed Controller by Woods

The Woods genuine range of ME Electronic fan speed controllers. This range of fan speed controllers is our best selling and can be used with any Fan / Motor which is single phase – 240 volts and speed controllable using either 2 or 3 wire control (+earth). ME1.1 suitable for a maximum full load of 1 amp  ...

ME1.3 Speed Controller by Flakt Woods
£54.45

ME1.3 Speed Controller by Flakt Woods

The Flakt Woods genuine range of ME Electronic fan speed controllers. This range of fan speed controllers is our best selling and can be used with any Fan / Motor which is single phase – 240 volts and fan speed controllable using either 2 or 3 wire control (+earth). ME1.1 suitable for a maximum full load of 1 amp ...

ME1.6 Fan Speed Controller by Flakt Woods
£54.45

ME1.6 Fan Speed Controller by Flakt Woods

The Flakt Woods genuine range of ME Electronic fan speed controllers. This range of fan speed controllers is our best selling and can be used with any Fan / Motor which is single phase – 240 volts and fan speed controllable using either 2 or 3 wire control (+earth). ME1.1 suitable for a maximum full load of 1 amp ...

ME1.6 Fan Speed Controller by Woods
£54.45

ME1.6 Fan Speed Controller by Woods

The Flakt Woods genuine range of ME Electronic fan speed controllers. This range of fan speed controllers is our best selling and can be used with any Fan / Motor which is single phase – 240 volts and fan speed controllable using either 2 or 3 wire control (+earth). ME1.1 suitable for a maximum full load of 1 amp ...

Minivent SK inline Bathroom Shower Kitchen Toilet extractor fan by Vent Axia
£30.01

Minivent SK inline Bathroom Shower Kitchen Toilet extractor fan by Vent Axia

Single speed 100mm in-line axial extract fan. Ducted bath/​shower kit, consists of a Minivent IP44 In-Line fan, a ventilation kit consisting of a white ceiling grille and spigot, external louvre for soffit or wall mounting plus 3 meters of flexible duct. The duct should be cut to size, the bend radius should be kept to a maximum to provide the best fan per ...

Minivent SKT with timer inline Bathroom Shower Kitchen Toilet extractor fan by Vent Axia
£35.80

Minivent SKT with timer inline Bathroom Shower Kitchen Toilet extractor fan by Vent Axia

High output tube extract fan with overrun timer. Ducted bath/​shower kit, consists of a Minivent IP44 In-Line fan, a ventilation kit consisting of a white ceiling grille and spigot, external louvre for soffit or wall mounting plus 3 meters of flexible duct. The duct should be cut to size, the bend radius should be kept to a maximum to provide the best fan  ...

Mitsubishi Lossnay LGH-100RVX-E Heat Recovery Unit
£2,153.41

Mitsubishi Lossnay LGH-100RVX‑E Heat Recovery Unit

Mitsubishi Lossnay Heat Recovery Units, in our opinion simply the best Heat Recovery Ventilator on the market from Mitsubishi one of the biggest brands in the world. If you want Heat Recovery, you want the Mitsubishi Lossnay LGH-RVX‑E range of units which are ideal for any commercial and Domestic use* The Mitsubishi Lossnay LGH-RVX‑E range o ...

Mitsubishi Lossnay LGH-150RVX-E Heat Recovery Unit
£3,695.06

Mitsubishi Lossnay LGH-150RVX‑E Heat Recovery Unit

Mitsubishi Lossnay Heat Recovery Units, in our opinion simply the best Heat Recovery Ventilator on the market from Mitsubishi one of the biggest brands in the world. If you want Heat Recovery, you want the Mitsubishi Lossnay LGH-RVX‑E range of units which are ideal for any commercial and Domestic use* The Mitsubishi Lossnay LGH-RVX‑E range o ...

Mitsubishi Lossnay LGH-150RVXT-E Heat Recovery Unit
£3,720.93

Mitsubishi Lossnay LGH-150RVXT‑E Heat Recovery Unit

Mitsubishi Lossnay Heat Recovery Units, in our opinion simply the best Heat Recovery Ventilator on the market from Mitsubishi one of the biggest brands in the world. If you want Heat Recovery, you want the Mitsubishi Lossnay LGH-RVX‑E range of units which are ideal for any commercial and Domestic use* The Mitsubishi Lossnay LGH-RVX‑E range o ...

Mitsubishi Lossnay LGH-15RVX-E Heat Recovery Unit
£679.06

Mitsubishi Lossnay LGH-15RVX‑E Heat Recovery Unit

Mitsubishi Lossnay Heat Recovery Units, in our opinion simply the best Heat Recovery Ventilator on the market from Mitsubishi one of the biggest brands in the world. If you want Heat Recovery, you want the Mitsubishi Lossnay LGH-RVX‑E range of units which are ideal for any commercial and Domestic use* The Mitsubishi Lossnay LGH-RVX‑E range o ...

Mitsubishi Lossnay LGH-160RVX3-E Heat Recovery Unit
£3,695.06

Mitsubishi Lossnay LGH-160RVX3‑E Heat Recovery Unit

Mitsubishi Lossnay Heat Recovery Units, in our opinion simply the best Heat Recovery Ventilator on the market from Mitsubishi one of the biggest brands in the world. If you want Heat Recovery, you want the Mitsubishi Lossnay LGH-RVX‑E range of units which are ideal for any commercial and Domestic use* The Mitsubishi Lossnay LGH-RVX‑E range o ...

Mitsubishi Lossnay LGH-200RVX-E Heat Recovery Unit
£4,249.25

Mitsubishi Lossnay LGH-200RVX‑E Heat Recovery Unit

Mitsubishi Lossnay Heat Recovery Units, in our opinion simply the best Heat Recovery Ventilator on the market from Mitsubishi one of the biggest brands in the world. If you want Heat Recovery, you want the Mitsubishi Lossnay LGH-RVX‑E range of units which are ideal for any commercial and Domestic use* The Mitsubishi Lossnay LGH-RVX‑E range o ...

Mitsubishi Lossnay LGH-200RVXT-E Heat Recovery Unit
£4,130.80

Mitsubishi Lossnay LGH-200RVXT‑E Heat Recovery Unit

Mitsubishi Lossnay Heat Recovery Units, in our opinion simply the best Heat Recovery Ventilator on the market from Mitsubishi one of the biggest brands in the world. If you want Heat Recovery, you want the Mitsubishi Lossnay LGH-RVX‑E range of units which are ideal for any commercial and Domestic use* The Mitsubishi Lossnay LGH-RVX‑E range o ...

Mitsubishi Lossnay LGH-250RVXT-E Heat Recovery Unit
£5,483.87

Mitsubishi Lossnay LGH-250RVXT‑E Heat Recovery Unit

Mitsubishi Lossnay Heat Recovery Units, in our opinion simply the best Heat Recovery Ventilator on the market from Mitsubishi one of the biggest brands in the world. If you want Heat Recovery, you want the Mitsubishi Lossnay LGH-RVX‑E range of units which are ideal for any commercial and Domestic use* The Mitsubishi Lossnay LGH-RVX‑E range o ...

Mitsubishi Lossnay LGH-25RVX-E Heat Recovery Unit
£798.97

Mitsubishi Lossnay LGH-25RVX‑E Heat Recovery Unit

Mitsubishi Lossnay Heat Recovery Units, in our opinion simply the best Heat Recovery Ventilator on the market from Mitsubishi one of the biggest brands in the world. If you want Heat Recovery, you want the Mitsubishi Lossnay LGH-RVX‑E range of units which are ideal for any commercial and Domestic use* The Mitsubishi Lossnay LGH-RVX‑E r ...

Mitsubishi Lossnay LGH-35RVX-E Heat Recovery Unit
£1,048.57

Mitsubishi Lossnay LGH-35RVX‑E Heat Recovery Unit

Mitsubishi Lossnay Heat Recovery Units, in our opinion simply the best Heat Recovery Ventilator on the market from Mitsubishi one of the biggest brands in the world. If you want Heat Recovery, you want the Mitsubishi Lossnay LGH-RVX‑E range of units which are ideal for any commercial and Domestic use* The Mitsubishi Lossnay LGH-RVX‑E range o ...

Mitsubishi Lossnay LGH-50RVX-E Heat Recovery Unit
£1,282.26

Mitsubishi Lossnay LGH-50RVX‑E Heat Recovery Unit

Mitsubishi Lossnay Heat Recovery Units, in our opinion simply the best Heat Recovery Ventilator on the market from Mitsubishi one of the biggest brands in the world. If you want Heat Recovery, you want the Mitsubishi Lossnay LGH-RVX‑E range of units which are ideal for any commercial and Domestic use* The Mitsubishi Lossnay LGH-RVX‑E range o ...

Mitsubishi Lossnay LGH-65RVX-E Heat Recovery Unit
£1,602.83

Mitsubishi Lossnay LGH-65RVX‑E Heat Recovery Unit

Mitsubishi Lossnay Heat Recovery Units, in our opinion simply the best Heat Recovery Ventilator on the market from Mitsubishi one of the biggest brands in the world. If you want Heat Recovery, you want the Mitsubishi Lossnay LGH-RVX‑E range of units which are ideal for any commercial and Domestic use* The Mitsubishi Lossnay LGH-RVX‑E range o ...

Mitsubishi Lossnay LGH-80RVX-E Heat Recovery Unit
£1,876.90

Mitsubishi Lossnay LGH-80RVX‑E Heat Recovery Unit

Mitsubishi Lossnay Heat Recovery Units, in our opinion simply the best Heat Recovery Ventilator on the market from Mitsubishi one of the biggest brands in the world. If you want Heat Recovery, you want the Mitsubishi Lossnay LGH-RVX‑E range of units which are ideal for any commercial and Domestic use* The Mitsubishi Lossnay LGH-RVX‑E range o ...

Mitsubishi PZ-61DR-E Lossnay Controller
£111.13

Mitsubishi PZ-61DR‑E Lossnay Controller

THE PZ-61DR‑E has been replaced by the PZ-62DR‑E Mitsubishi PZ-61DR‑E controller to suit the Lossnay Heat Recovery Units, in our opinion simply the best Heat Recovery Ventilator on the market from Mitsubishi one of the biggest brands in the world. If you wa ...

Mitsubishi PZ-62DR-E Lossnay Controller
£111.13

Mitsubishi PZ-62DR‑E Lossnay Controller

Mitsubishi PZ-62DR‑E controller to suit the Lossnay Heat Recovery Units, in our opinion simply the best Heat Recovery Ventilator on the market from Mitsubishi one of the biggest brands in the world. If you want Heat Recovery, you want the Mitsubishi Lossnay LGH-RVX‑E range of units and you want them to be controlled by the PZ-62DR‑E which are ideal ...

PIR 4 Passive Infrared Sensor
£40.86

PIR 4 Passive Infrared Sensor – c/​w run on timer settable between 5 — 30 minutes

A Wall or Ceiling mounted movement detector for use with any of our Domestic mains voltage fans. This little single gang size sensor is a great little energy saving device. The fan will only run when the sensor senses movement. Example Fit this in a bathroom and the fan will only run when someone is in the bathroom. Fitted  ...

Round Plastic Rigid Ducting 100mm diameter
£4.10

Round Plastic Rigid Ducting 100mm diameter

Low cost Round Plastic Rigid Ducting in 100mm dia and available in any length up to 2 metres long. Just choose then length you need and we’ll cut to suit, but don’t worry if you order too much, although rigid this plastic duct is easy to cut. Usually used as a wall or cavity sleeve, but if you need a length of 100mm dia duct, this will fit the bill ...

Round Plastic Rigid Ducting 150mm dia
£6.50

Round Plastic Rigid Ducting 150mm dia

Low cost Round Plastic Rigid Ducting in 150mm dia and available in any length up to 2 metres long. Just choose then lenght you need and we’ll cut to suit, but don’t worry if you order too much, although rigid this plastic duct is easy to cut. Usually used as a wall or cavity sleeve, but if you need a length of 100mm dia duct, th ...

Vent Axia 100mm Extractor Fan Wall Fitting Kit (Brown) 254100
£31.42

Vent Axia 100mm Extractor Fan Wall Fitting Kit (Brown) 254100

This wall vent kit suit any 100mm wall extractor fan. A perfect way to complete your installation The vent kit comes complete with an external wall grille and a telescopic liner. The telescopic liner makes it easy to fit, with no messy cutting required. Telescopic liner suits wall thicknesses from 225mm up to ...

Vent Axia 100mm Extractor Fan Wall Fitting Kit (White) 254102
£31.42

Vent Axia 100mm Extractor Fan Wall Fitting Kit (White) 254102

This wall vent kit suit any 100mm wall extractor fan. A perfect way to complete your installation The wall vent kit comes complete with an external wall grille and a telescopic liner. The telescopic liner makes it easy to fit, with no messy cutting required. Telescopic liner suits wall thicknesses from 225mm  ...

Vent Axia 150mm Extractor Fan Wall Fitting Kit (Brown) 140903
£35.33

Vent Axia 150mm Extractor Fan Wall Fitting Kit (Brown) 140903

This wall vent kit suit any 150mm wall extractor fan. A perfect way to complete your installation The wall vent kit comes complete with an external wall grille and a telescopic liner. The telescopic liner makes it easy to fit, with no messy cutting required. Telescopic liner suits wall thicknesses from 225mm  ...

Vent Axia ACM100 part number 17104010
£106.24

Vent Axia ACM100 part number 17104010

The Vent Axia ACM range of energy efficient Mixed Flow In-Line fans that are now quieter than any other product on the market. ACM is now in a range of six products in the range which have been designed for use with rigid and flexible ducting. In Line Mixed Flow fans offer two and half times the pressure of conventional axial fans, are dimensionally more  ...

Vent Axia ACM100T with run on timer part number 17104020
£132.17

Vent Axia ACM100T with run on timer part number 17104020

The Vent Axia ACM range of energy efficient Mixed Flow In-Line fans that are now quieter than any other product on the market. ACM is now in a range of six products which have been designed for use with rigid and flexible ducting. In Line Mixed Flow fans offer two and half times the pressure of conventional axial fans, are dimensionally more compact makin ...

Vent Axia ACM125 part number 17105010
£126.00

Vent Axia ACM125 part number 17105010

The Vent Axia ACM range of energy efficient Mixed Flow In-Line fans that are now quieter than any other product on the market. ACM is now in a range of six products in the range which have been designed for use with rigid and flexible ducting. In Line Mixed Flow fans offer two and half times the pressure of conventional axial fans, are dimensionally more  ...

Vent Axia ACM125T with run on timer part number 17105020
£133.41

Vent Axia ACM125T with run on timer part number 17105020

The Vent Axia ACM range of energy efficient Mixed Flow In-Line fans that are now quieter than any other product on the market. ACM is now in a range of six products which have been designed for use with rigid and flexible ducting. In Line Mixed Flow fans offer two and half times the pressure of conventional axial fans, are dimensionally more compact makin ...

Vent Axia ACM150 part number 17106010
£152.84

Vent Axia ACM150 part number 17106010

The Vent Axia ACM range of energy efficient Mixed Flow In-Line fans that are now quieter than any other product on the market. ACM is now in a range of six products in the range which have been designed for use with rigid and flexible ducting. In Line Mixed Flow fans offer two and half times the pressure of conventional axial fans, are dimensionally more  ...

Vent Axia ACM150T with run on timer part number 17106020
£198.59

Vent Axia ACM150T with run on timer part number 17106020

The Vent Axia ACM range of energy efficient Mixed Flow In-Line fans that are now quieter than any other product on the market. ACM is now in a range of six products which have been designed for use with rigid and flexible ducting. In Line Mixed Flow fans offer two and half times the pressure of conventional axial fans, are dimensionally more compact makin ...

Vent Axia ACM200 part number 17108010
£239.65

Vent Axia ACM200 part number 17108010

The Vent Axia ACM range of energy efficient Mixed Flow In-Line fans that are now quieter than any other product on the market. ACM is now in a range of six products in the range which have been designed for use with rigid and flexible ducting. In Line Mixed Flow fans offer two and half times the pressure of conventional axial fans, are dimensionally more  ...

Vent Axia ACM200T with run on timer part number 17108020
£291.53

Vent Axia ACM200T with run on timer part number 17108020

The Vent Axia ACM range of energy efficient Mixed Flow In-Line fans that are now quieter than any other product on the market. ACM is now in a range of six products which have been designed for use with rigid and flexible ducting. In Line Mixed Flow fans offer two and half times the pressure of conventional axial fans, are dimensionally more compact makin ...

Vent Axia ACM250 part number 17110010
£280.41

Vent Axia ACM250 part number 17110010

The Vent Axia ACM range of energy efficient Mixed Flow In-Line fans that are now quieter than any other product on the market. ACM is now in a range of six products which have been designed for use with rigid and flexible ducting. In Line Mixed Flow fans offer two and half times the pressure of conventional axial fans, are dimensionally more compact makin ...

Vent Axia ACM315 part number 17112010
£316.24

Vent Axia ACM315 part number 17112010

The Vent Axia ACM range of energy efficient Mixed Flow In-Line fans that are now quieter than any other product on the market. ACM is now in a range of six products which have been designed for use with rigid and flexible ducting. In Line Mixed Flow fans offer two and half times the pressure of conventional axial fans, are dimensionally more compact makin ...

Vent Axia LS315 Plastic Louvre Shutter
£47.78

Vent Axia LS315 Plastic Louvre Shutter

A Louvre Shutter is a gravity type shutter which can be used to terminate and weather extract systems. When the fan is running the plastic blades will open allowing the air to be extracted from the system, and when the fan is not running will be closed, this helps to prevent back draughts and water ingress The shutter is commonly used to terminate  ...

Vent Axia LS355 Plastic Louvre Shutter
£50.00

Vent Axia LS355 Plastic Louvre Shutter

A Louvre Shutter is a gravity type shutter which can be used to terminate and weather extract systems. When the fan is running the plastic blades will open allowing the air to be extracted from the system, and when the fan is not running will be closed, this helps to prevent back draughts and water ingress The shutter is commonly used to terminate  ...

Vent Axia LS400 Plastic Louvre Shutter
£62.22

Vent Axia LS400 Plastic Louvre Shutter

A Louvre Shutter is a gravity type shutter which can be used to terminate and weather extract systems. When the fan is running the plastic blades will open allowing the air to be extracted from the system, and when the fan is not running will be closed, this helps to prevent back draughts and water ingress The shutter is commonly used to terminate  ...

Vent Axia VASF100T Silent Bathroom Toilet wall/window mounted extractor fan 446659B
£61.09

Vent Axia VASF100T Silent Bathroom Toilet wall/​window mounted extractor fan 446659B

Bathroom, Toilet, Kitchen and Cloakroom extract fan c/​w integral shutter and electronic over run timer ( adjustable up to 30 mins), 2 speed — selectable at installation. Vent Axia’s Silent Range Fan. The Quietest fan from what we consider to be the most famous brand name in residential and commercial ventilation equipment in the UK. No matter which ...

Vent Axia Visionex PIR Sensor 459623A
£141.09

Vent Axia Visionex PIR Sensor 459623A – c/​w run on timer settable between 5 — 25 minutes

Vent Axia Wall or Ceiling Mounted movement detector for use with any domestic/​commercial fan. Suitable for use with Vent Axia T‑Series controller on AUTO setting.Suitable to to be wired for On/​Off or Trickle/​Boost operation. Includes an adjustable run on timer (525 minutes).Will detect movement up to 10 metres away.Internal us ...

Wall Ventilation External Gravity Shutter in Brown (100mm) by Vent Axia
£24.40

Wall Ventilation External Gravity Shutter in Brown (100mm) by Vent Axia – terminates 100mm dia rigid or flexible ducting

This plastic gravity shutter is a cost effective solution when you need to terminate a hole in an external or internal wall. This shutter an ideal fuss free solution, when only the shutter is required or when you need to customize your wall vent kit (usually when a standard wall sleeve isn’t long enough for the t ...

Wall Ventilation External Gravity Shutter in White (100mm) by Vent Axia
£24.40

Wall Ventilation External Gravity Shutter in White (100mm) by Vent Axia – terminates 100mm dia rigid or flexible ducting

This plastic external gravity shutter is a cost effective solution when you need to terminate a hole in an external or internal wall. This shutter is an ideal fuss free solution, when only the shutter is required or when you need to customize your wall vent kit (usually when a standard wall sleeve isn’t long enou ...

Back To Top

Cookies

We use analytical cookies that need your permission. For more details and advanced options view our Cookies Policy.