Ziehl Abegg FN035-4EQ Plate mounted extract fan supplied as VSP35514
Systemair, Vent-Axia, Ziehl-Abegg
Prices & Options
Manufactured by Ziehl Abegg and distributed by Vent Axia and Systemair, this is one of the most popular plate axials on the market today. This fan has a sickle blade and offers improved performance over the aerofoil blade. Ziehl Abegg are one of, if not the biggest external rotor motor manufacturers in the world, they have over 100 years of engineering experience behind them, which gives you the confidence. If a low cost painted finish fan is your choice this is among the best available.
Supplied fully assembled
Fully speed controllable
Can be used in any non hazardous environment
Suitable to run in temperatures from ‑40°C to up to 70°C in some instances
Low to medium air volumes
Low to medium static pressures
Available sizes 250mm – 630mm 1ph from stock
Tough epoxy paint finish
Die cast aluminium impellers (the bit that goes around)
Motor class F insulation with protection to IP54
The curve below shows the fans performance, which is 0.90 m³/s at Free Air and peaks at 0.58 m³/s at 75Pa, the fan can perform anywhere between these points and the red dot is shown as an example
| Code & Description | Price | |
|---|---|---|
| FN035-4EQ : Ziehl Abegg FN035-4EQ Plate mounted extract fan supplied as VSP35514 | £230.35 + VAT £276.42 | |
We accept : 
15% discount with code ‘welcnfan1’
Note: Code can only be used once per customer. Discount codes are entered after selecting shipping method.
Need it today? We offer same day deliveries
Same day deliveries locally & nationwide (UK mainland only). Price on request — Send message with your order, or call 0161 864 1777.
Related Products
355mm Louvre Shutter
A Louvre Shutter is a gravity type shutter which can be used to terminate and weather extract systems. When the fan is running the plastic blades will open allowing the air to be extracted from the system, and when the fan is not running will be closed, this helps to prevent back draughts and water ingress The shutter is commonly used to terminate ...
GV1 — Gas Ventilation Interlock Panel
GV1 Ventilation Gas interlock Panel This panel is designed to protect Kitchen staff from the dangers of Co2 fumes created when gas is used for cooking. It protects the staff by closing the Gas valve supplying the gas to the kitchen in the event of a lack of ventilation to extract the fumes; this is usually the re ...
GV 2 Gas Ventilation Interlock Panel
GV2 Ventilation Gas interlock Panel This panel is designed to protect Kitchen staff from the dangers of Co2 fumes created when gas is used for cooking. It protects the staff by closing the Gas valve supplying the gas to the kitchen in the event of a lack of ventilation to extract the fumes; this is usually the re ...
NCSP Gas Ventilation Interlock Panel GVI-CMP1
NCSP Ventilation Gas interlock Panel This is our cheapest and best selling Ventilation Gas Interlock Panel The panel is designed to protect Kitchen staff from the dangers of Co2 fumes created when gas is used for cooking. It protects the staff by closing the Gas valve supplying t ...
1 Phase on /off Starter c/w Overload
Brook Crompton are one of the leading motor manufacturers in the UK, this Series 3000 single phase starter offers push button on and off, with overload protection. Overload protection gives extra safety by automatically stopping the fan when the full load current is exceeded, unlike fuse protection which is designed to protect life and u ...
Vent Axia W10303102M fan speed controller
The Vent-Axia Industrial range of electronic fan speed controllers manufactured by Vent-Axia. This range of fan speed controllers can be used with any Fan / Motor which is single phase – 240 volts and speed controllable using either 2 or 3 wire control (+earth). W10303102M suitable for a maximum full load of 2.5 amps ...