Ziehl Abegg FC630-4EQ Plate Mounted Extract Fan Supplied as ESP63014
Systemair, Vent-Axia, Ziehl-Abegg
Prices & Options
Manufactured by Ziehl Abegg and distributed by Vent Axia and Systemair, this is probably one of the most popular plate mounted axials on the market today. Ziehl Abegg are one of, if not the biggest external rotor motor manufacturers in the world, they have over 100 years of engineering experience behind them, which gives you the confidence. If a low cost painted finish fan is your choice this is among the best available.
The FC630-4EQ will be supplied as an ESP63014
- Supplied fully assembled
- Fully speed controllable
- Can be used in any non hazardous environment
- Suitable to run in temperatures from ‑40°C to up to 70°C in some instances
- Low to medium air volumes
- Low to medium static pressures
- Available sizes 315mm – 630mm from stock
- 710mm – 1000mm check for availability
- Tough epoxy paint finish
- Die cast aluminium impellers (the bit that goes around)
- Motor class F insulation with protection to IP54
- All fans reversible for supply or extract
The curve below shows the fans performance, which is 5.09 m³/s at Free Air and peaks at 2.75 m³/s at 250Pa, the fan can perform anywhere between these points and the red dot is shown as an example
- 76dB(A) at 1.5 metres from the listener
- 70dB(A) at 3 metres from the listener
| Code & Description | Price | |
|---|---|---|
| FC630-4EQ : Replacement Ziehl Abegg FC630-4EQ Plate Mounted Extract Fan Supplied as ESP63014 | £620.37 + VAT £744.44 | |
We accept : 
15% discount with code ‘welcnfan1’
Note: Code can only be used once per customer. Discount codes are entered after selecting shipping method.
Need it today? We offer same day deliveries
Same day deliveries locally & nationwide (UK mainland only). Price on request — Send message with your order, or call 0161 864 1777.
Related Products
CDA 630 x 1D straight through Silencer
630mm dia x 630mm long straight through silencer (generally reduces a fan noise level by 7 – 10dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting.The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve ever heard a car with n ...
NCSP Gas Ventilation Interlock Panel GVI-CMP1
NCSP Ventilation Gas interlock Panel This is our cheapest and best selling Ventilation Gas Interlock Panel The panel is designed to protect Kitchen staff from the dangers of Co2 fumes created when gas is used for cooking. It protects the staff by closing the Gas valve supplying t ...
630mm Louvre Shutter
A Louvre Shutter is a gravity type shutter which can be used to terminate and weather extract systems. When the fan is running the plastic blades will open allowing the air to be extracted from the system, and when the fan is not running will be closed, this helps to prevent back draughts and water ingress The shutter is commonly used to terminate ...
TEID13A Transformer Single Phase Fan Speed Controller
The TEID range of Transformer fan speed controllers manufactured by Flakt Woods. This range of fan speed controllers can be used with any Fan / Motor which is single phase – 240 volts and speed controllable using either 2 or 3 wire control (+earth). TEID 1A EA900000 suitable for a maximum full load of 1.0 ampTEID 1.5A ...