40Jm MaxFan high pressure long cased axial extract fan by Woods
Flakt Woods
Prices & Options
The Flakt Woods JmMax extract fan axial flow fan range of high performance and reliability 2 stage axial flow fans
This fan was introduced to satisfy ventilation systems where high pressure fans are required, where only single phase supply (240volts) is available and speed control is required
A typical application where this fan is commonly used is in the catering industry where a high level of filtration is required, usually the result of fitting odour control via Pre and Carbon Filters*
The build quality and reliability are the highest we have ever experienced, in a range of fans that are designed to work harder than most
Every time you fit this fan you know you’ve made the right choice, and it will enhance your reputation for only using the best quality products
- Supplied fully assembled
- Fully speed controllable
- Can be used in any non hazardous environment
- Suitable in temperatures from ‑40°C to 50°C
- Low to high air volumes
- Low to high static pressures
- Available sizes 315mm – 630mm from stock
The Casings are spun sheet steel, then hot dipped galvanised to give a finish highly resistant to corrosion and can be mounted externally and internally
The impeller (the bit that goes around and moves the air) is manufactured die cast aluminium
The motors are totally enclosed with class F insulation with protection to IP55.
*High pressure systems can also consist of duct size restrictions, an unusual amount of ducting including a high number of bends, other forms of filtration such as Heppa Filters or Electrostatic filters. We can check the suitability of this fan for your application if required, please contact by any means you feel comfortable with and we’ll offer free advice
The curve below shows the fans performance, which is 1.72 m³/s at Free Air and peaks at 1.05 m³/s at 250Pa, the fan can perform anywhere between these points and the red dot is shown as an example.
- Me1.6 electronic speed controller
- MT1.8 transformer speed controller
- 1Ph starter c/w overload
- Flanges
- Mounting Feet
- Flexible Connections
- Anti vibration mounts
- Silencers
- Guards
- Backdraught dampers
- 73dB(A) at 1.5 metres from the listener
- 67dB(A) at 3 metres from the listener
| Code & Description | Price | |
|---|---|---|
| EQ411463 : 40Jm MaxFan high pressure long cased axial extract fan by Woods | £1,528.89 + VAT £1,834.67 | |
We accept : 
15% discount with code ‘welcnfan1’
Note: Code can only be used once per customer. Discount codes are entered after selecting shipping method.
Need it today? We offer same day deliveries
Same day deliveries locally & nationwide (UK mainland only). Price on request — Send message with your order, or call 0161 864 1777.
Related Products
ME1.6 Fan Speed Controller by Flakt Woods
The Flakt Woods genuine range of ME Electronic fan speed controllers. This range of fan speed controllers is our best selling and can be used with any Fan / Motor which is single phase – 240 volts and fan speed controllable using either 2 or 3 wire control (+earth). ME1.1 suitable for a maximum full load of 1 amp ...
A.V.Mount (Anti Vibration Mount) – Load range per mount 9Kg — 50Kg
Supplied in sets of 4 Anti Vibration Mounts (A.V. Mounts) attach to the bottom of Mounting Feet. A.V. Mounts are used to isolate the fan from the system to prevent vibration transfer through fixings or structures. A.V. Mounts can be used to isolate any products from the main system to prevent vibration transfer The main uses we ...
400mm Mounting Feet
Supplied in pairs 400mm Mounting Foot, used to fit directly to the fan as part of a full ancillary package The Mounting Foot can be used to mount the fan in the horizontal or vertical position Usually used in conjunction with Anti Vibration Mounts Can also be used to fit directly to Silencers with or without Anti Vibration Moun ...
400mm dia Flange
400mm dia Flange used to bolt directly to the Fan, as part of a full ancillary package or for the fan to mount inline in ducting Can also be used to fix directly to a Silencer Can also be used to fix directly to ducting Hot dipped Galvanised after manufacture
400mm Flexible Connection
400mm Flexible connection, used to fit to Flanges (with spigots), Silencers (with spigots) or spiral ducting. A flexible connection is used to isolate the fan from the system to prevent vibration transfer and helps minimise noise transfer through fixings or structures. It can also be used to simplify installation by bridging any small gaps b ...
CDA 400 x 1D straight through Silencer
400mm dia x 400mm long straight through silencer (generally reduces a fan noise level by 7 – 10dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting.The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve ever heard a car with n ...
CDA 400 x 2D straight through Silencer
400mm dia x 800mm long straight through silencer (generally reduces a fan noise level by 10 – 13dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting. The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve ever heard a car with ...
NCSP Gas Ventilation Interlock Panel GVI-CMP1
NCSP Ventilation Gas interlock Panel This is our cheapest and best selling Ventilation Gas Interlock Panel The panel is designed to protect Kitchen staff from the dangers of Co2 fumes created when gas is used for cooking. It protects the staff by closing the Gas valve supplying t ...
GV 2 Gas Ventilation Interlock Panel
GV2 Ventilation Gas interlock Panel This panel is designed to protect Kitchen staff from the dangers of Co2 fumes created when gas is used for cooking. It protects the staff by closing the Gas valve supplying the gas to the kitchen in the event of a lack of ventilation to extract the fumes; this is usually the re ...
GV1 — Gas Ventilation Interlock Panel
GV1 Ventilation Gas interlock Panel This panel is designed to protect Kitchen staff from the dangers of Co2 fumes created when gas is used for cooking. It protects the staff by closing the Gas valve supplying the gas to the kitchen in the event of a lack of ventilation to extract the fumes; this is usually the re ...
400mm Louvre Shutter
A Louvre Shutter is a gravity type shutter which can be used to terminate and weather extract systems. When the fan is running the plastic blades will open allowing the air to be extracted from the system, and when the fan is not running will be closed, this helps to prevent back draughts and water ingress The shutter is commonly used to terminate ...
A.V. Mounts (Anti Vibration Mounts) – load range per mount 5Kg ‑28Kg
Supplied in sets of 4 Anti Vibration Mounts (A.V. Mounts) attach to the bottom of Mounting Feet. A.V. Mounts are used to isolate the fan from the system to prevent vibration transfer through fixings or structures. A.V. Mounts can be used to isolate any products from the main system to prevent vibration transfer The main uses we ...
400mm dia Flange – suits any manufacturer of fans
400mm dia Flange used to bolt directly to any manufacturer of Fans, as part of a full ancillary package or for the fan to mount inline in ducting. This flange is unique because it is designed to fix to UK and European PCD detail, meaning this flange will fix to any manufacturers fans Can also be used to fix directly to a Silencer Can ...
1 Phase on /off Starter c/w Overload
Brook Crompton are one of the leading motor manufacturers in the UK, this Series 3000 single phase starter offers push button on and off, with overload protection. Overload protection gives extra safety by automatically stopping the fan when the full load current is exceeded, unlike fuse protection which is designed to protect life and u ...
Flakt Woods BT914025 motor
Replacement motor to suit the following fans: EJ411452 — 40JM/16/4/5/40-deg Long Cased Axial Fan 4 pole 1ph What does the code mean BT = motor dia9 = motor length1 = single phase025 = Kw ratingPlease Note If your motor code does not match exactly please ring to ...