15% discount with code ‘welcnfan1’
Note: Code can only be used once per customer. Discount codes are entered after selecting shipping method.
Products
Catering (455)
Need it today? We offer same day deliveries
Same day deliveries locally & nationwide (UK mainland only). Price on request — Send message with your order, or call 0161 864 1777.
1 Phase on /off Starter c/w Overload
Brook Crompton are one of the leading motor manufacturers in the UK, this Series 3000 single phase starter offers push button on and off, with overload protection. Overload protection gives extra safety by automatically stopping the fan when the full load current is exceeded, unlike fuse protection which is designed to protect life and u ...
150mm Wall Vent Kit (White) by Vent Axia
This wall vent kit suit any 150mm wall extractor fan. A perfect way to complete your installation The wall vent kit comes complete with an external wall grille and a telescopic liner. The telescopic liner makes it easy to fit, with no messy cutting required. Telescopic liner suits wall thicknesses from 225mm ...
15JM.33 2900 rpm Series 33 200 Deg C Bifurcated Fan DB125603
Another great fan from FlaktWoods, Bifurcated Fans (sometimes shortened to Bifs or Bif Fans) are inline axial flow fans where the motor has been taken out of the airstream. This allows the fan to operate at higher temperatures. Available sizes 152mm – 305mm from stockThe Casings are spun sheet steel, then hot dipped galvanised to give a finis ...
2102/315/4/1Ph Plate Mounted Extract Fan by Flakt Woods
THE 2102 RANGE OF FANS IS OBSOLETE, WE CAN ONLY SUPPLY SPARES.Replacement Motors can be found by clicking the link Flakt Woods BT514012 motorThe Flakt Woods 2102 range of low cost high quality plate mounted fans. ...
2102/355/4/1Ph Plate Mounted Extract Fan by Flakt Woods
THE 2102 RANGE OF FANS IS OBSOLETE, WE CAN ONLY SUPPLY SPARES. Replacement Motors can be found by clicking the link BT414013 The Flakt ...
2102/400/4/1Ph Plate Mounted Extract Fan by Flakt Woods
THE FAN IS OBSOLETE, WE CAN ONLY SUPPLY SPARES — WE CANNOT SUPPLY THE FAN IF PURCHASEDThe Flakt Woods 2102 range of low cost high quality plate mounted extract fans.Our recommended number one plate mounted fan choice Flakt ...
2102/450/4/1Ph Plate Mounted Extract Fan by Flakt Woods
THE FAN IS OBSOLETE, WE CAN ONLY SUPPLY SPARES — WE CANNOT SUPPLY THE FAN IF PURCHASEDThe Flakt Woods 2102 range of low cost high quality plate mounted extract fans.Our recommended number one plate mounted fan choice Flakt ...
2102/500/4/1Ph Plate Mounted Axial Fan by Flakt Woods
THE FAN IS OBSOLETE, WE CAN ONLY SUPPLY SPARES — WE CANNOT SUPPLY THE FAN IF PURCHASEDThe Flakt Woods 2102 range of low cost high quality plate mounted extract fans.Our recommended number one plate mounted fan choice Flakt ...
25JM.33 1400 rpm Series 33 200 Deg C Bifurcated Fan DB215607
Another great fan from FlaktWoods, Bifurcated (sometimes shortened to Bifs or Bif Fans) are inline axial flow fans where the motor has been taken out of the airstream. This allows the fan to operate at higher temperatures. Available sizes 152mm – 305mm from stockThe Casings are spun sheet steel, then hot dipped galvanised to give a finish hig ...
25JM.33 1400 rpm Series 33 200 Deg C Bifurcated Fan DB215608
Another great fan from FlaktWoods, Bifurcated (sometimes shortened to Bifs or Bif Fans) are inline axial flow fans where the motor has been taken out of the airstream. This allows the fan to operate at higher temperatures. Available sizes 152mm – 305mm from stockThe Casings are spun sheet steel, then hot dipped galvanised to give a finish hig ...
25JM.33 2900 rpm Series 33 200 Deg C Bifurcated Fan DB215609
Another great fan from FlaktWoods, Bifurcated Fans (sometimes shortened to Bifs or Bif Fans) are inline axial flow fans where the motor has been taken out of the airstream. This allows the fan to operate at higher temperatures. Available sizes 152mm – 305mm from stockThe Casings are spun sheet steel, then hot dipped galvanised to give a finis ...
3 Phase on off Starter c/w Overload
Brook Crompton are one of the leading motor manufacturers in the UK, this Series 3000 single phase starter offers push button on and off, with overload protection. Overload protection gives extra safety by automatically stopping the fan when the full load current is exceeded, unlike fuse protection which is designed to protect life and u ...
30JM.33 1400 rpm Series 33 200 Deg C Bifurcated Fan DB025607
Another great fan from FlaktWoods, Bifurcated Fans (sometimes shortened to Bifs or Bif Fans) are inline axial flow fans where the motor has been taken out of the airstream. This allows the fan to operate at higher temperatures. Available sizes 152mm – 305mm from stockThe Casings are spun sheet steel, then hot dipped galvanised to give a finis ...
30JM.33 1400 rpm Series 33 200 Deg C Bifurcated Fan DB025608
Another great fan from FlaktWoods, Bifurcated Fans (sometimes shortened to Bifs or Bif Fans) are inline axial flow fans where the motor has been taken out of the airstream. This allows the fan to operate at higher temperatures. Available sizes 152mm – 305mm from stockThe Casings are spun sheet steel, then hot dipped galvanised to give a finis ...
30JM.33 2900 rpm Series 33 200 Deg C Bifurcated Fan DB025609
Another great fan from FlaktWoods, Bifurcated Fans (sometimes shortened to Bifs or Bif Fans) are inline axial flow fans where the motor has been taken out of the airstream. This allows the fan to operate at higher temperatures. Available sizes 152mm – 305mm from stockThe Casings are spun sheet steel, then hot dipped galvanised to give a finis ...
315 Mounting Feet
Supplied in pairs 315mm Mounting Foot, used to fit directly to the fan as part of a full ancillary package The Mounting Foot can be used to mount the fan in the horizontal or vertical position Usually used in conjunction with Anti Vibration Mounts Can also be used to fit directly to Silencers with or without Anti Vibration Moun ...
315mm dia Flange
315mm dia Flange used to bolt directly to the Fan, as part of a full ancillary package or for the fan to mount inline in ducting Can also be used to fix directly to a Silencer Can also be used to fix directly to ducting Hot dipped Galvanised after manufacture
315mm dia Flange – suits any manufacturer of fans
315mm dia Flange used to bolt directly to any manufacturer of Fans, as part of a full ancillary package or for the fan to mount inline in ducting. This flange is unique because it is designed to fix to UK and European PCD detail, meaning this flange will fix to any manufacturers fans Can also be used to fix directly to a Silencer Can ...
315mm Flexible Connection
315mm Flexible connection, used to fit to Flanges (with spigots), Silencers (with spigots) or spiral ducting. A flexible connection is used to isolate the fan from the system to prevent vibration transfer and helps minimise noise transfer through fixings or structures. It can also be used to simplify installation by bridging any small gaps b ...
315mm Louvre Shutter
A Louvre Shutter is a gravity type shutter which can be used to terminate and weather extract systems. When the fan is running the plastic blades will open allowing the air to be extracted from the system, and when the fan is not running will be closed, this helps to prevent back draughts and water ingress The shutter is commonly used to terminate ...
315mm Maxfan Compac supplied with Inverter Speed Controller by Flakt Woods
Introducing the amazing NEW Flakt Woods JM Maxfan Compac the evolution of the bestselling Maxfan designed for high performance and reliability The Maxfan has been improved to offer even higher pressures and fan performance using only one motor and only one impeller (the bit that goes around) The Maxfan Compac is supplied with an Inverter spe ...
31JM/16/4/5/34/1Ph Long Cased Axial Flow Fan by Flakt Woods – EJ321460 replaces the obsolete DX321460
The Flakt Woods JM axial flow extract fan range of cost effective highest quality long cased axials. We think this product is the World’s best axial fan, and our recommended number one choice for every industrial and commercial application The build quality and reliability are the highest we have ever experienced with fans still running sinc ...
31JM/16/4/5/40/1Ph Long cased axial flow extract fan by Flakt Woods
this fan is now obsolete it has been replaced with a EJ321460 to make it ERP 2013 compliant (please be aware there may be a performance difference, check if in doubt) All spare parts are s ...
31JMP/16/4/5/32 FlaktWoods Plate Axial was DT315410
Features of another great plate axial from FlaktWoods Diameters 315 mm to 630 mmVolumes Up to 4.1 m³/s (14,750 m³/h)Pressures Up to 175 Pa (Static)Impeller Fixed Pitch, JM Aerofoil Case Style Supplied fully assembledThe plate is made from steel and powder coated RAL 7001Installation can be either horizontal or v ...
355mm dia Flange – suits any manufacturer of fans
mm dia Flange used to bolt directly to any manufacturer of Fans, as part of a full ancillary package or for the fan to mount inline in ducting. This flange is unique because it is designed to fix to UK and European PCD detail, meaning this flange will fix to any manufacturers fans Can also be used to fix directly to a Silencer Can al ...
355mm dia Flange
355mm dia Flange used to bolt directly to the Fan, as part of a full ancillary package or for the fan to mount inline in ducting Can also be used to fix directly to a Silencer Can also be used to fix directly to ducting Hot dipped Galvanised after manufacture
355mm dia Flexible Connection
355mm Flexible connection, used to fit to Flanges (with spigots), Silencers (with spigots) or spiral ducting. A flexible connection is used to isolate the fan from the system to prevent vibration transfer and helps minimise noise transfer through fixings or structures. It can also be used to simplify installation by bridging any small gaps b ...
355mm Louvre Shutter
A Louvre Shutter is a gravity type shutter which can be used to terminate and weather extract systems. When the fan is running the plastic blades will open allowing the air to be extracted from the system, and when the fan is not running will be closed, this helps to prevent back draughts and water ingress The shutter is commonly used to terminate ...
355mm Maxfan Compac supplied with Inverter Speed Controller by Flakt Woods
Introducing the amazing NEW Flakt Woods JM Maxfan Compac the evolution of the bestselling Maxfan designed for high performance and reliability The Maxfan has been improved to offer even higher pressures and fan performance using only one motor and only one impeller (the bit that goes around) The Maxfan Compac is supplied with an Inverter spe ...
355mm Mounting Feet
Supplied in pairs 355mm Mounting Foot, used to fit directly to the fan as part of a full ancillary package The Mounting Foot can be used to mount the fan in the horizontal or vertical position Usually used in conjunction with Anti Vibration Mounts Can also be used to fit directly to Silencers with or without Anti Vibration Moun ...
35JM/16/4/5/22/1Ph Long Cased Axial Flow Fan by Flakt Woods
The Flakt Woods JM axial flow extract fan range of cost effective highest quality long cased axials. We think this product is the World’s best axial fan, and our recommended number one choice for every industria ...
35JM/16/4/5/40/1Ph Long cased axial flow extract fan by Flakt Woods
This Fan is now Obsolete it has been replaced with a EJ361460 to make it ERP 2013 compliant (please be aware there may be a performance difference, check ...
35JMP/16/4/5/24 FlaktWoods Plate Axial was DT355410
Features of another great plate axial from FlaktWoods Diameters 315 mm to 630 mmVolumes Up to 4.1 m³/s (14,750 m³/h)Pressures Up to 175 Pa (Static)Impeller Fixed Pitch, JM Aerofoil Case Style Supplied fully assembledThe plate is made from steel and powder coated RAL 7001Installation can be either horizontal or v ...
400mm dia Flange – suits any manufacturer of fans
400mm dia Flange used to bolt directly to any manufacturer of Fans, as part of a full ancillary package or for the fan to mount inline in ducting. This flange is unique because it is designed to fix to UK and European PCD detail, meaning this flange will fix to any manufacturers fans Can also be used to fix directly to a Silencer Can ...
400mm dia Flange
400mm dia Flange used to bolt directly to the Fan, as part of a full ancillary package or for the fan to mount inline in ducting Can also be used to fix directly to a Silencer Can also be used to fix directly to ducting Hot dipped Galvanised after manufacture
400mm Flexible Connection
400mm Flexible connection, used to fit to Flanges (with spigots), Silencers (with spigots) or spiral ducting. A flexible connection is used to isolate the fan from the system to prevent vibration transfer and helps minimise noise transfer through fixings or structures. It can also be used to simplify installation by bridging any small gaps b ...
400mm Louvre Shutter
A Louvre Shutter is a gravity type shutter which can be used to terminate and weather extract systems. When the fan is running the plastic blades will open allowing the air to be extracted from the system, and when the fan is not running will be closed, this helps to prevent back draughts and water ingress The shutter is commonly used to terminate ...
400mm Maxfan Compac supplied with Inverter speed controller by Flakt Woods
Introducing the amazing NEW Flakt Woods JM Maxfan Compac the evolution of the bestselling Maxfan designed for high performance and reliability The Maxfan has been improved to offer even higher pressures and fan performance using only one motor and only one impeller (the bit that goes around) The Maxfan Compac is supplied with an Inverter spe ...
400mm Mounting Feet
Supplied in pairs 400mm Mounting Foot, used to fit directly to the fan as part of a full ancillary package The Mounting Foot can be used to mount the fan in the horizontal or vertical position Usually used in conjunction with Anti Vibration Mounts Can also be used to fit directly to Silencers with or without Anti Vibration Moun ...
40Jm MaxFan high pressure long cased axial extract fan by Flakt Woods
The Flakt Woods JmMax extract fan axial flow fan range of high performance and reliability 2 stage axial flow fans This fan was introduced to satisfy ventilation systems where high pressure fans are required, where only single phase supply (240volts) is available and speed control is required ...
40Jm MaxFan high pressure long cased axial extract fan by Woods
The Flakt Woods JmMax extract fan axial flow fan range of high performance and reliability 2 stage axial flow fans This fan was introduced to satisfy ventilation systems where high pressure fans are required, where only single phase supply (240volts) is available and speed control is required ...
40JM.BIF (200)/20/2/6/32 3PH — Flakt Woods Bifurcated fan
Another great fan from FlaktWoods, Bifurcated (sometimes shortened to Bifs or Bif Fans) are inline axial flow fans where the motor has been taken out of the airstream. This allows the fan to operate at higher temperatures. Available sizes 400mm – 630mm from stock800mm and 1000mm ring for availabilityThe Casings are spun sheet steel, the ...
40JM.BIF (200)/20/4/6/32 3PH Flakt Woods Bifurcated fan
Another great fan from FlaktWoods, Bifurcated (sometimes shortened to Bifs or Bif Fans) are inline axial flow fans where the motor has been taken out of the airstream. This allows the fan to operate at higher temperatures. Available sizes 400mm – 630mm from stock800mm and 1000mm ring for availabilityThe Casings are spun sheet steel, the ...
40JM.BIF (200)/20/4/6/32 3PH Woods Bifurcated fan
Another great fan from Woods Air Movement, Bifurcated (sometimes shortened to Bifs or Bif Fans) are inline axial flow fans where the motor has been taken out of the airstream. This allows the fan to operate at higher temperatures. Available sizes 400mm – 630mm from stock800mm and 1000mm ring for availabilityThe Casings are spun sheet st ...
40JM/16/4/5/40/1Ph Long cased axial flow extract fan by Flakt Woods
This Fan is now Obsolete it has been replaced with a EJ411452 to make it ERP 2013 compliant. All spare parts are still ...
40Jm/16/4/5/40/1PH Long Cased Axial Flow Fan by Flakt Woods
The Flakt Woods JM axial flow extract fan range of cost effective highest quality long cased axials. We think this product is the World’s best axial fan, and our recommended number one choice for every industrial and commercial application The build quality and reliability are the highest we have ever experienced with fans still running sinc ...
40JMP/16/4/5/32 FlaktWoods Plate Axial was DT405410
Features of another great plate axial from FlaktWoods Diameters 315 mm to 630 mmVolumes Up to 4.1 m³/s (14,750 m³/h)Pressures Up to 175 Pa (Static)Impeller Fixed Pitch, JM Aerofoil Case Style Supplied fully assembledThe plate is made from steel and powder coated RAL 7001Installation can be either horizontal or v ...
450mm dia Flange
450mm dia Flange used to bolt directly to the Fan, as part of a full ancillary package or for the fan to mount inline in ducting Can also be used to fix directly to a Silencer Can also be used to fix directly to ducting Hot dipped Galvanised after manufacture
450mm dia Flange – suits any manufacturer of fans
450mm dia Flange used to bolt directly to any manufacturer of Fans, as part of a full ancillary package or for the fan to mount inline in ducting. This flange is unique because it is designed to fix to UK and European PCD detail, meaning this flange will fix to any manufacturers fans Can also be used to fix directly to a Silencer Can ...
450mm Flexible Connection
450mm Flexible connection, used to fit to Flanges (with spigots), Silencers (with spigots) or spiral ducting. A flexible connection is used to isolate the fan from the system to prevent vibration transfer and helps minimise noise transfer through fixings or structures. It can also be used to simplify installation by bridging any small gaps b ...