Products

Safety (118)

ME1.1 Speed Controller by Flakt Woods
£45.56

ME1.1 Speed Controller by Flakt Woods

The Flakt Woods genuine range of ME Electronic fan speed controllers. This range of fan speed controllers is our best selling and can be used with any Fan / Motor which is single phase – 240 volts and speed controllable using either 2 or 3 wire control (+earth). ME1.1 suitable for a maximum full load of 1 amp ...

630mm Flexible Connection
£50.54

630mm Flexible Connection

630mm Flexible connection, used to fit to Flanges (with spigots), Silencers (with spigots) or spiral ducting. A flexible connection is used to isolate the fan from the system to prevent vibration transfer and helps minimise noise transfer through fixings or structures. It can also be used to simplify installation by bridging any small gaps b ...

ME1.6 Fan Speed Controller by Woods
£54.45

ME1.6 Fan Speed Controller by Woods

The Flakt Woods genuine range of ME Electronic fan speed controllers. This range of fan speed controllers is our best selling and can be used with any Fan / Motor which is single phase – 240 volts and fan speed controllable using either 2 or 3 wire control (+earth). ME1.1 suitable for a maximum full load of 1 amp ...

ME1.6 Fan Speed Controller by Flakt Woods
£54.45

ME1.6 Fan Speed Controller by Flakt Woods

The Flakt Woods genuine range of ME Electronic fan speed controllers. This range of fan speed controllers is our best selling and can be used with any Fan / Motor which is single phase – 240 volts and fan speed controllable using either 2 or 3 wire control (+earth). ME1.1 suitable for a maximum full load of 1 amp ...

Woods ME1.3 speed controller
£54.45

Woods ME1.3 speed controller

The Woods genuine range of ME Electronic fan speed controllers. This range of fan speed controllers is our best selling and can be used with any Fan / Motor which is single phase – 240 volts and fan speed controllable using either 2 or 3 wire control (+earth). ME1.1 suitable for a maximum full load of 1 amp M ...

ME1.3 Speed Controller by Flakt Woods
£54.45

ME1.3 Speed Controller by Flakt Woods

The Flakt Woods genuine range of ME Electronic fan speed controllers. This range of fan speed controllers is our best selling and can be used with any Fan / Motor which is single phase – 240 volts and fan speed controllable using either 2 or 3 wire control (+earth). ME1.1 suitable for a maximum full load of 1 amp ...

Flakt Woods 200mm diameter x 900mm Long Circular Silencer BDER-30-020-090
£54.45

Flakt Woods 200mm diameter x 900mm Long Circular Silencer BDER-30 – 020-090

The effective and economic solution for sound attenuation in circular duct systems. 200mm diameter x 900mm long duct mounted extractor fan silencer. Can be used with manufacturer of fan with spigots to mount inline with ducting. The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve e ...

710mm dia Flange
£54.80

710mm dia Flange – suits any manufacturer of fans

710mm dia Flange used to bolt directly to any manufacturer of Fans, as part of a full ancillary package or for the fan to mount inline in ducting. This flange is unique because it is designed to fix to UK and European PCD detail, meaning this flange will fix to any manufacturers fans Can also be used to fix d ...

Flakt Woods 250mm diameter x 600mm Long Circular Silencer BDER-30-025-060
£55.56

Flakt Woods 250mm diameter x 600mm Long Circular Silencer BDER-30 – 025-060

The effective and economic solution for sound attenuation in circular duct systems. 250mm diameter x 600mm long duct mounted extractor fan silencer. Can be used with manufacturer of fan with spigots to mount inline with ducting. The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve e ...

710mm Mounting Feet
£56.19

710mm Mounting Feet

Supplied in pairs 710mm Mounting Foot, used to fit directly to the fan as part of a full ancillary package The Mounting Foot can be used to mount the fan in the horizontal or vertical position Usually used in conjunction with Anti Vibration Mounts Can also be used to fit directly to Silencers with or without Anti Vibration Moun ...

710mm Flexible Connection
£56.89

710mm Flexible Connection

710mm Flexible connection, used to fit to Flanges (with spigots), Silencers (with spigots) or spiral ducting. A flexible connection is used to isolate the fan from the system to prevent vibration transfer and helps minimise noise transfer through fixings or structures. It can also be used to simplify installation by bridging any small gaps b ...

Flakt Woods 250mm diameter x 900mm Long Circular Silencer BDER-30-025-090
£68.89

Flakt Woods 250mm diameter x 900mm Long Circular Silencer BDER-30 – 025-090

The effective and economic solution for sound attenuation in circular duct systems. 250mm diameter x 900mm long duct mounted extractor fan silencer. Can be used with manufacturer of fan with spigots to mount inline with ducting. The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve e ...

315mm Louvre Shutter
£90.23

315mm Louvre Shutter

A Louvre Shutter is a gravity type shutter which can be used to terminate and weather extract systems. When the fan is running the plastic blades will open allowing the air to be extracted from the system, and when the fan is not running will be closed, this helps to prevent back draughts and water ingress The shutter is commonly used to terminate  ...

355mm Louvre Shutter
£97.28

355mm Louvre Shutter

A Louvre Shutter is a gravity type shutter which can be used to terminate and weather extract systems. When the fan is running the plastic blades will open allowing the air to be extracted from the system, and when the fan is not running will be closed, this helps to prevent back draughts and water ingress The shutter is commonly used to terminate  ...

CDA 355 x 1D straight through Silencer
£99.00

CDA 3551D straight through Silencer

355mm dia x 355mm long straight through silencer (generally reduces a fan noise level by 7 – 10dB (A)* Can be supplied to either bolt directly to any manufacturer of cased axial or with spigots to mount inline with ducting.The addition of this silencer to a system will act in the same way a silencer does on a car, so if you’ve ever heard a car with n ...

Back To Top

Cookies

We use analytical cookies that need your permission. For more details and advanced options view our Cookies Policy.