Business (530)
630mm dia Flange used to bolt directly to the Fan, as part of a full ancillary package or for the fan to mount inline in ducting Can also be used to fix directly to a Silencer Can also be used to fix directly to ducting Hot dipped Galvanised after manufacture
630mm Flexible connection, used to fit to Flanges (with spigots), Silencers (with spigots) or spiral ducting. A flexible connection is used to isolate the fan from the system to prevent vibration transfer and helps minimise noise transfer through fixings or structures. It can also be used to simplify installation by bridging any small gaps b ...
A Louvre Shutter is a gravity type shutter which can be used to terminate and weather extract systems. When the fan is running the plastic blades will open allowing the air to be extracted from the system, and when the fan is not running will be closed, this helps to prevent back draughts and water ingress The shutter is commonly used to terminate ...
Introducing the amazing NEW Flakt Woods JM Maxfan Compac the evolution of the bestselling Maxfan designed for high performance and reliability The Maxfan has been improved to offer even higher pressures and fan performance using only one motor and only one impeller (the bit that goes around) The Maxfan Compac is supplied with an Inverter spe ...
Supplied in pairs 630mm Mounting Foot, used to fit directly to the fan as part of a full ancillary package The Mounting Foot can be used to mount the fan in the horizontal or vertical position Usually used in conjunction with Anti Vibration Mounts Can also be used to fit directly to Silencers with or without Anti Vibration Moun ...
The Flakt Woods JmMax fan axial flow extract fan range of high performance and reliability 2 stage axial flow fans This fan was introduced to satisfy ventilation systems where high pressure fans are required. A typical application where this fan is commonly used is in the catering industr ...
The Flakt Woods JmMax fan axial flow extract fan range of high performance and reliability 2 stage axial flow fans This fan was introduced to satisfy ventilation systems where high pressure fans are required, where only single phase supply (240volts) is available and speed control is required ...
Another great fan from FlaktWoods, Bifurcated (sometimes shortened to Bifs or Bif Fans) are inline axial flow fans where the motor has been taken out of the airstream. This allows the fan to operate at higher temperatures. Available sizes 400mm – 630mm from stock800mm and 1000mm ring for availabilityThe Casings are spun sheet steel, the ...
Another great fan from Woods Air Movement, Bifurcated (sometimes shortened to Bifs or Bif Fans) are inline axial flow fans where the motor has been taken out of the airstream. This allows the fan to operate at higher temperatures. Available sizes 400mm – 630mm from stock800mm and 1000mm ring for availabilityThe Casings are spun sheet st ...
The Flakt Woods JM axial flow extract fan range of cost effective highest quality long cased axials. We think this product is the World’s best axial fan, and our recommended number one choice for every industrial and commercial application. The build quality and reliability are the highest we have ever experience ...
The Flakt Woods JM axial flow extract fan range of cost effective highest quality long cased axials. We think this product is the World’s best axial fan, and our recommended number one choice for every industrial and commercial application The build quality and reliability are the highes ...
The Flakt Woods JM axial flow extract fan range of cost effective highest quality long cased axials. We think this product is the World’s best axial fan, and our recommended number one choice for every industrial and commercial application The build quality and reliability are the highest ...
Features of another great plate axial from FlaktWoods Diameters 315 mm to 630 mmVolumes Up to 4.1 m³/s (14,750 m³/h)Pressures Up to 175 Pa (Static)Impeller Fixed Pitch, JM Aerofoil Case Style Supplied fully assembledThe plate is made from steel and powder coated RAL 7001Installation can be either horizontal or v ...
710mm dia Flange used to bolt directly to any manufacturer of Fans, as part of a full ancillary package or for the fan to mount inline in ducting. This flange is unique because it is designed to fix to UK and European PCD detail, meaning this flange will fix to any manufacturers fans Can also be used to fix d ...
710mm dia Flange used to bolt directly to the Fan, as part of a full ancillary package or for the fan to mount inline in ducting Can also be used to fix directly to a Silencer Can also be used to fix directly to ducting Hot dipped Galvanised after manufacture
Note: Code can only be used once per customer. Discount codes are entered after selecting shipping method.
Same day deliveries locally & nationwide (UK mainland only). Price on request — Send message with order, or call 0161 864 1777.
